1.ElevatorRaw potato through this elevator into the pre-washing machine for cleaning mud.The electric appliances used are schneider brand, the frequency converter is mitsubishi, the motor speed is adjustable material 304 stainless steel.
| Dimension |
2000x800x1600mm |
| Power |
0.75kw/380v/50hz |
| Consist of |
water tank+hoist device |
| Thickness |
2mm |
| Material |
SUS304 |
| Weight |
180KG |
2.Cleaning and peeling machine
Potato through the elevator into the peeling machine, after the hair roller thoroughly peeling.The number of rough roller used is 6, the number of emery roller is 3.Potato can realize automatic discharge through screw pushing and the peeling time can be adjusted. The frame used is 50*50*3mm high quality 304 stainless steel square pipe and 2mm 304 stainless steel. The thickness of grid plates on both sides is 6mm.
| Size |
3100x900x1500mm |
| Power |
4.37KW/380V/50HZ |
| Material |
SUS304 |
3.Selecting machine
After peeling potatoes into this equipment, and then by artificial pick to see if there is a bad point or unqualified potatoes, or did not wash the skin, do a treatment.This selection line adopts PVC high-quality food-grade conveyor belt, which is safe and hygienic and meets the food requirements. The plate used is 304 high-quality stainless steel with a thickness of 2mm. The motor is Siemens speed-regulating motor, and theconveyor belt speed can be adjusted.
| Size |
3000x700x900mm |
| Power |
0.75 KW/380V/50HZ |
| Two parts |
returning device+picking line |
| Material |
SUS304 except the belt |
4.Cutting machine
This machine is used to cut potatoes into sticks.it can cut potato, sweet potato, taro into sticks.It is smooth in surface and cut in fast speed.Easy to wash and easy to operate.Save labor and cost.
| Size |
950x800x950mm |
| Power |
1.1kw 380V/50HZ/set |
| Weight |
120kg |
5.Conveyor
The lifting mesh belt used is 304 stainless steel mesh belt, the mesh diameter is 3mm, the frame used is 50*50*3mm high quality 304 stainless steel square pipe and 2mm stainless steel, the bearing is 316 stainless steel bearing, the motor used is high quality Siemens adjustable speed motor, the speed can be adjusted.
| Model |
HLC-500 |
| Size |
2200x800x1600mm |
| Power |
0.75kw 380V/50HZ/set |
| Weight |
330kg |
6.Cleaning line
Out in the machine qualified chips directly into rinsing machine, through the bubble wave cleaning, the chips in state, fully wash the chips on the surface of the starch, etc.,and is equipped with water spray cleaning function, the motor for the domestic exports of bubble generator material 304 stainless steel material, the thickness of 2.5 mm, the mesh belt mesh used for 3 mm, mesh belt width is 700 mm.
| Size |
3000*1200*1300mm |
| Power |
5KW/380V/50HZ |
| Function |
hoisting device+residue/Scraping |
| Weight |
800kg |
7.Blanching machine
French fries after rinse into blanching machine, the machine adopts electrical heating way, the water temperature control, materials for high quality 304 stainless steel material, used for 304 stainless steel bearing, bearing network band width of 700 mm, mesh 3 mm, through the machine stopped the fries the activity of the enzyme, keep the original fresh colour and lustre, chips increase the softness of the cells, evaporation, mesh belt motor for Siemens control motor, insulation layer thickness of 60 mm, effectively prevent heat loss, electrical components for schneider brand.
| Size |
3000*1200*1400mm |
| Heating method |
electricity heating 70kw |
| Weight |
1400Kg |
8.Vibrate dehydrator
The blanched chips are fed through a mesh belt to a vibrating dehydrator, which vibrates at high frequencies to remove water from the surface.The machine is made of 304 stainless steel, the thickness of the plate is 3mm, the frame square pipe is 80*80*3mm high quality 304 stainless steel square pipe, the vibration motor is 0.25kw, the vibration amplitude is adjustable.Working principle: under the high-frequency vibration of the vibration motor, the moisture content on the surface of potato chips is fully removed, and the material moves forward and enters the air main line under the state of vibration.
| Size |
1800*1000*900mm |
| Heating method |
electricity heating 1.5kw |
| Weight |
120kg |
9.Cooling and dehydrator
It is used to vibrating to remove water and it can leak out small and waste raw material which is smaller than 30mm. And we can design it based on customer's requirement.
| Size |
3000*1200*1400mm |
| Power |
4.1KW/380V/50HZ |
| Weight |
500kg |
10.Elevator
The material is 304 stainless steel with a thickness of 2mm. The bearing used is 316 stainless steel bearing and the motor is Siemens motor brand.
| Size |
2000*800*1300mm |
| Power |
0.55KW/380V/50Hz |
| Weight |
180kg |
11.Fried machine
The equipment adopts the pure oil Fried technology, equipped with dynamic filtering system, belt loop device, automatic filter on the working process of the slag, guarantee the quality of frying oil, total 304 high quality stainless steel, the thickness of 3.5 mm, motor of 1.5 KW frequency conversion motor, mesh belt width is 700 mm, equipped with automatic promotion function, to form the health, adopt double mesh belt conveyor food, on the net with frequency control of motor speed, oil temperature from room temperature to 300 degrees adjustable, equipped with electrical components are famous international brand schneider brand.The working principle is as follows: after the potato chips are blanched and air-dried, the oil temperature is set at 180 degrees from the hoist to the inlet of the frying machine. After the potato chips are Fried in the oil for about 40 seconds, they are output by the conveyor belt and enter the next degreasing process.This frying machine adopts electric heating method.
| Model |
HLY-500 |
| Dimesion |
3000*1200*2400mm |
| Principle |
Continuous working |
| Weight |
800kg |
12.De-oil machin
The blanched chips are fed through a mesh belt to a vibrating dehydrator, which vibrates at high frequencies to remove water from the surface.The machine is made of 304 stainless steel, the thickness of the plate is 3mm, the frame square pipe is 80*80*3mm high quality 304 stainless steel square pipe, the vibration motor is 0.25kw, the vibration amplitude is adjustable. Working principle: under the high-frequency vibration of the vibration motor, the moisture content on the surface of potato chips is fully removed, and the material moves forward and enters the air main line under the state of vibration.
| Size |
1800*1000*900mm |
| Heating method |
electricity heating 1.5kw |
| Weight |
120Kg |
13.Air dryer machine
It is used to vibrating to remove water and it can leak out small and waste raw material which is smaller than 30mm. And we can design it based on customer's requirement.
| Size |
3000*1200*1400mm |
| Power |
4.1KW/380V/50HZ |
| Weight |
500kg |
14.Elevator
The material is 304 stainless steel with a thickness of 2mm. The bearing used is 316 stainless steel bearing and the motor is Siemens motor brand.
| Size |
2000*800*1500mm |
| Power |
0.55KW/380V/50HZ |
| Weight |
180kg |
15.Frozen machine
16.Packing machine
| Size |
3000*3000*2600 |
| Power |
6kw/380/50hz |
| Weight |
1200kg |
Please tell me your requirements,we can customize machine according to your requirements.
*If you can not open the links above on Alibaba APP on mobile phone, please use IE browser to visit our website:https://hlchinafood.en.made-in-china.com/product-list-1.html
Zhengzhou HongLe Machinery Equipment Co., Ltd., established in 2011, is a professional manufacturer engaged in the research, development, production, sale and service of all kinds of food machinery and supporting machinery production line,packaging machine,Water treatment equipment, extraction and concentration production equipment.We are located in Zhengzhou with convenient transportation access. Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company has introduced a series of advanced equipment including(Milling machine, drilling machine, shearing machine, cutting machine, etc.).In addition, we have obtained CE certificates.Purchased from world-renowned manufacturers. Selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as Europe, North America, Southeast Asia, Africa, South America, South Korea .And received good feedback from most clients .Our market share is increasing each year.And we are now leading members of international trade enterprise of Henan Province.Zhengzhou HongLe Machinery Equipment Co. Ltd. will provide overseas customers with good product after-sales service, including remote guidance and door-to-door services. We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.Our business philosophy is win-win, honesty, development and cooperation.
Audited Supplier 
){kind=link}
){kind=link}