Structural principle:
The new chopper is based on the original chopper. The material is fed from the conveyor belt so that the material to be cut can be evenly scattered in the hopper, which is conducive to uniform cutting. The rough cutting of the upper knife is used, and the grading screen is adopted. The qualified particle size materials are directly discharged and unqualified. The granular material is then finely cut by the next knife to avoid repeated cutting of the qualified material to the lower cutter to reduce the consumption of material and oil. The gap between cutters can be adjusted to facilitate the cutting out of different specifications of materials. The grading department allocates sieves of different specifications, and the materials are sieved to achieve the desired size.
operating:
1. Before starting the machine, check whether the parts of the transmission are loose and whether there is any abnormal noise.
2. The electrical components of each connected power cord have no damage or leakage.
3. After checking the equipment is normal, start idling, followed by grading screen, under the knife, on the grading screen, the upper knife, cloth belt, hoist, turn off the opposite.
4. Remove the foreign material impurities from the dried material to prevent the cutter from being damaged. Then put the material into the hopper, adjust the size of the hopper discharge door and the speed of the conveyor belt, so that the feed and the cutter can be synchronised. .
5. Adjust the gap between the upper and lower cutters according to the customer's requirements and cut out the different specifications of the material
6. There are adjustment handles at the back and the back of the knife, loosen the handle to turn the handle, the adjustment gap is smaller inward, the cut-out particle size is small, and vice versa, there are scales on both sides of the reference adjustment plate. There is a positioning fulcrum inside the upper and lower knives, and the positioning can not be adjusted when the minimum clearance is reached, so as not to damage the blade when the two knives are in contact and affect the quality of the cutting.
7. The material to be cut enters the screen body and is classified by a sieve. Replace the sieve according to the customer's requirements to achieve the required product specifications
8. The cut-off phenomenon of the cut-off material should be eliminated so as not to affect the discharge of the material. The oil content is high, and the oil residue remaining on the equipment is cleaned in time to ensure hygienic cleaning.
9. The screen body has two structures, one is the inner rubber bearing of the screen body arm, and the other is the spring support and the vibration is transmitted.
10. Operate the lower sieve vibrating motor, turn the direction of rotation in the direction of the arrow, or turn it counterclockwise.
11 The bolts, electrical appliances, and wiring of each transmission component shall be periodically inspected and filled with oil, and problems shall be eliminated in time to ensure normal use.
12 The hoisting machine and the cloth belt are equipped with a speed-adjusting motor, which can be adjusted at any time according to the cutting speed. The two PVC belts may experience deviation after a certain period of time. Fine adjustment of the adjusting bolts at both ends can not be adjusted, and the belt can be tightened to the other side. Turn sideways.
Parameter
| Crushing machine |
Capacity |
voltage |
power |
frequency |
Machine size |
weight |
| HLC-400 |
400kg/h |
380V |
0.75*2KW |
50HZ |
1.6*0.8*1.5M |
300KG |
| HLC-600 |
600kg/h
|
380V |
4.9kw |
50HZ |
1.8*0.8*2m |
600kg |
Please tell me your requirements,we can customize machine according to your requirements.
*If you can not open the links above on Alibaba APP on mobile phone, please use IE browser to visit our website:https://hlchinafood.en.made-in-china.com/product-list-1.html
Zhengzhou HongLe Machinery Equipment Co., Ltd., established in 2011, is a professional manufacturer engaged in the research, development, production, sale and service of all kinds of food machinery and supporting machinery production line,packaging machine,Water treatment equipment, extraction and concentration production equipment.We are located in Zhengzhou with convenient transportation access. Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction. In recent years, our company has introduced a series of advanced equipment including(Milling machine, drilling machine, shearing machine, cutting machine, etc.).In addition, we have obtained CE certificates.Purchased from world-renowned manufacturers. Selling well in all cities and provinces around China, our products are also exported to clients in such countries and regions as Europe, North America, Southeast Asia, Africa, South America, South Korea .And received good feedback from most clients .Our market share is increasing each year.And we are now leading members of international trade enterprise of Henan Province.Zhengzhou HongLe Machinery Equipment Co. Ltd. will provide overseas customers with good product after-sales service, including remote guidance and door-to-door services. We also welcome OEM and ODM orders. Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements.Our business philosophy is win-win, honesty, development and cooperation.
Audited Supplier 
){kind=link}
){kind=link}