| Customization: | Available |
|---|---|
| After-sales Service: | Oline Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction:
Skin roller is made up of 304 stainless steel which has been specially treated with heat,therefore, it wears out less and lasts for twice or longer time than other products.
Features:
1.Skin roller is specially produced ,so the surface of the fish is clean and the actual, outcome of cutting efficiency is more than 99 %, which maximize the capability and productivity.
2.The blades can be adjusted front and back up and down so it can be applied to any kind of fish
3.The input insert place,bottom support,upper board and others can be separated with one touch action, therefore, the machine can be washed out easily and always kept clean.
4.Possible use in small factory
| Model | HLB-270 | HLB-400 |
| Voltage | 380v/220V | 380v/220V |
| Power | 200w | 750w |
| Material | SS | SS |
| Roller speed | 14m/min | 22m/min |
| Capacity | 15-30pcs/min | 30-50pcs/min |
| Dimension | 540*420*410mm | 800*640*900mm |
| Weight | 48kg | 100kg |
| With wooden weight | 58kg | 138kg |
| With wooden size | 490*540*530mm | 700*750*1000mm |
Packing: inside plastic bag, outside wooden case for poultry feed pellet making machine (Based on the customers' need adopt the wooden case or wooden pellets, etc.).
Transportation: shipping, train, express or upon clients' demands.
1. Installation and Debugging: Within the time of warranties, the seller will send the engineer to guide to install the machine, the buyer should prepare the materials needed and should be responsible for the engineer's safety, travel expense, accommodation abroad. And shall pay the salary for the engineer,150 dollars per day, and if the installation would exceed one month, then the buyer shall pay the engineer 200 dollars per day for the exceeding time. And the seller will provide the Instruction Manual and the Foundation Drawings.
2. The quality assurance date is one year (exclude the quick wear parts) after commissioning, but not exceed 15 months from date on which machine leaves the factory.
3. If the equipment appear the equipment failure because of improper handling
of user, we are in charge of maintenance, and collect the appropriate cost.
4. We offer the components with favorable price, perdurable maintenance.
After quality assurance date, if the equipment needs to be repaired, we only collect the cost price
){kind=link}